Use the right exposure
We know about the two problems in the photo. The light is diminished or the light is high. Dark pictures and blinking images These two words are meant to mean both these things, Underexposed and Overexposed in the Photography Language.
If the light is low, the picture will be dark and the light will burn if it is high, the idea is normal. These ideas are out of date in current photography. It is possible to remove the correct light in very low light or too much light to reduce the light. For example, you can get flush images using flash in the dark, if there is some light, it will be added to the flash light. As far as the amount of light used to flush, the effect of the flush will be reduced. Many do not notice that there is an arrangement to reduce the amount of flush according to the distance or as per the requirement.
All the cameras present in the camera are taken to look at it. Take a look at whether to reduce or decrease the flush light.
For flashing the flash light in the NICON D96 camera, press the flash button to turn the command dial. (+) Means to increase the light and (-) decrease the light. So your exact setting can be 0 according to the situation or may be either 2 or -2.
Use the aperture control and the Seter Speed to control the lighting for photos without flush. Increasing the number of aperture increases the amount of light. As 5.6, the amount of light that the light uses will be 16, much less than that. If the light is high, increase the quality of the aperture.
At the time of expiry of the expiry time of the shutter speed. 1/60 Ster Speed means 60 percent of the time will be used in light of light, 1/30 will double its time. So reduce the speed of the shutter speed where more light is required. If the light is high, arrange the reduction by increasing the Ster Speed. Again, remind you to take pictures immediately and change accordingly.
Another issue is the ISO. The higher the value of the camera sensor the faster the light will accept. Use ISO quality less to reduce more, use ISO more in low light.
There are other functions present in many cameras, exposure compositions. If you have it in your camera, using it can control exposure beyond that and get better results. Here also (+) increases the exposure and (-) is meant to reduce the exposure.
Correct exposure means good pictures. Therefore, take less importance while taking pictures in less or more light.
If the light is low, the picture will be dark and the light will burn if it is high, the idea is normal. These ideas are out of date in current photography. It is possible to remove the correct light in very low light or too much light to reduce the light. For example, you can get flush images using flash in the dark, if there is some light, it will be added to the flash light. As far as the amount of light used to flush, the effect of the flush will be reduced. Many do not notice that there is an arrangement to reduce the amount of flush according to the distance or as per the requirement.
All the cameras present in the camera are taken to look at it. Take a look at whether to reduce or decrease the flush light.
For flashing the flash light in the NICON D96 camera, press the flash button to turn the command dial. (+) Means to increase the light and (-) decrease the light. So your exact setting can be 0 according to the situation or may be either 2 or -2.
Use the aperture control and the Seter Speed to control the lighting for photos without flush. Increasing the number of aperture increases the amount of light. As 5.6, the amount of light that the light uses will be 16, much less than that. If the light is high, increase the quality of the aperture.
At the time of expiry of the expiry time of the shutter speed. 1/60 Ster Speed means 60 percent of the time will be used in light of light, 1/30 will double its time. So reduce the speed of the shutter speed where more light is required. If the light is high, arrange the reduction by increasing the Ster Speed. Again, remind you to take pictures immediately and change accordingly.
Another issue is the ISO. The higher the value of the camera sensor the faster the light will accept. Use ISO quality less to reduce more, use ISO more in low light.
There are other functions present in many cameras, exposure compositions. If you have it in your camera, using it can control exposure beyond that and get better results. Here also (+) increases the exposure and (-) is meant to reduce the exposure.
Correct exposure means good pictures. Therefore, take less importance while taking pictures in less or more light.
No comments